Synergy Linear Hybrid Comp AK 24mm - SLIP FIT
These are for the SAM7K-01 and others that have the pinned fake booster.
NOTE- You will need to cut and crown the barrel flush with the front of the non threaded lug.
USE Red Loctite on set screw when installing set screw.
Make sure set screw is centered in pin groove on lug. The comp will sit off the FSB just a bit when set screw is in groove.
Melonite Finish 416 Stainless Steel Core with G5 Titanium Sleeve
1.25" OD
2" OAL
3.8 oz
Anodizing colors vary as they are done manually. Color may dull after handling, use an amonia based window cleaner to wipe it down and bring the color back.
Multicolor is anodized option
Raw is Raw Ti (like Chrome)
TiN is Titanium Nitride (GOLD)
Blasted is bead blasted Ti (Grey)
Black is Black
Disclaimer: Due to the nature of the heat-treating process, some visual imperfections are normal. Coloring may vary.
